The KHL9109 is fitted to the ceiling at the top of a 50mm diameter Highline tube. It has 3 x 20 watt lamps in the body and a built in transformer. The fitting can be fitted to the highline pole only (ie.when ceilings are particular high) however the wires will need to be run up the inside of the pole.
Dimensions of main body: - 300mm diameter 45mm high
Cannot be used with dimmers.
General Information : -
WARNING: All electrical fittings must be installed by a qualified electrician. Care must be taken where lights are enclosed in a cabinet, ensure there is adequate ventilation. Light fittings should not be fitted in the vicinity of flammable surfaces. Low voltage lamps must never be touched by unprotected fingers.
The Highline system consists of tubes and a range of trays and accessories which allow easy access to everyday items and provide valuable storage space.
